Ecogrid

is a plastic porous paving product, it comes in three different depths and four different load bearing capacities. It arrives on-site pre-clipped together in 12 tile or 1.33 square metre sections.
Ecogrid is a permeable paving class leader with by far the best patented locking system that you would expect from the world leader in its field and a world leader for the past twenty years.
Ecogrid needs no spikes or time consuming clips to assemble and is THE proven product for a myriad of uses. Ecogrid is TUV tested for loads of 350/250 and 120 tonnes per square metre, however these tests are carried our empty, giving an accurate test of the load bearing quality of the grid alone. Other grid manufacturers show their load capacities as full grids, if we did this; we would show twice our published capacities at 240/500 and 700 tonnes per square metre!
Ecogrid is a ground reinforcement product made from recycled polyethylene. It is THE solution for car parks, pedestrian and cycle paths, picnic areas, golf courses, parks, fire lanes, event areas and horse paddocks. Ecogrid is an environmentally friendly alternative for use in domestic driveways, Airfield runways and taxi ways, reinforcement of roadsides, banks, shores and slopes. Ecogrid is a sustainable ground reinforcement tile that provides excellent water drainage. Ecogrid comes in four different sizes and three different colours. Black green and brown.

The range further consists of special elements for curves and parking demarcation markers.Ecogrid is available in a number of sizes (types E50, S50, EH40 and EL30) and can be filled with all sorts of material such as grass, sand or gravel.

Ecogrid- the original porous paving medium and still the best……why?
• 50mm deep, 7mm wall thickness, the thickest on the market
• Load capacity 400 tonnes/m2
• More UV stable than others on the market.
• More aesthetically pleasing, can be completely covered.
• NATO approved by British and American military.
• 5 different depths of paver available.
• 4 Different colours
• Recognised World leader as the original.
• 9.72 kg/m2, almost double the weight of others.
• Up to 95 square metres on a pallet (E30), economical delivery.
• Patented safety locking system, badly copied by others.
• Made from recycled Polyethylene.
• Swift and economical fitting due to tile size and locking deign 100m2/man/hour.
• Excellent on site, internet or telephone advice from UK qualified staff.
• Installation teams specialising in this product available.
• UK training centre.

Ecogrid general product guide
(Ecoraster is the manufacturers name for Ecogrid. Raster is grid in German)
Each grid is always 330mm x 330mm, there are 9 grids per square metre. Grids are delivered on a pallet that consists of rows of 1.33 square metres or 12 grids pre-locked together firmly for swift installation times. Ecogrid core products

Ecogrid E50
43 layers on a full pallet=57.19 square metres. 1258 square metres on a full load

Technical data for the ECORASTER E50: Dimensions: 33 cm x 33 cm x 5 cm Wall thickness/wall height: 7 mm / 50 mm Weight per unit: 1.08 kg Weight per m2: 10,917 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 800 tonnes Dimensional stability:
temperature range –
50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 %
Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

E50 uses
Car park reinforcement
Outdoor riding rings
Fire service access
Raised verge reinforcement
Connecting paths, drives
Building site routes, loading areas
Gardening and landscaping
Slope and dike reinforcements
Helipads
Airstrip reinforcements
Industrial and commercial applications
Military applications
Ecogrid A50

Colours available: Black (standard), green, terracotta, light grey (Lead times vary for non-standard)

Ecogrid S50
43 layers on a full pallet=57.19 square metres. 1258 square metres on a full load

Technical data for the ECORASTER S50: Dimensions: 33 cm x 33 cm x 5 cm Wall thickness/wall height: 5.5 mm / 50 mm Weight per unit: 0,74 kg Weight per m2: 6,84 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

S50 uses

The NO1 equestrian grid for arenas and maneges
Garage drives and carports
Fire service access
Gardening and landscaping
Bank and river bed reinforcements
Slope and dike reinforcements
Golf course paths
Lawn greening
Ecogrid EH40

Colours available: Black (standard), green, terracotta, light grey (Lead times vary for non-standard)

Ecogrid EH40
55 layers on a pallet=73.15 square metres. 1609 square metres on a full load

Technical data for the ECORASTER E40: Dimensions: 33 cm x 33 cm x 4 cm Wall thickness/wall height: 4.5 mm / 40 mm Weight per unit: 0.63 kg Weight per m2: 5,22 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

EH40 uses

Car park reinforcement
Outdoor riding rings
Fire service access
Raised verge reinforcement
Connecting paths, drives
Building site routes, loading bays
Gardening and landscaping
Slope and dike reinforcements
Helipads
Airstrip reinforcements
Industrial and commercial applications
Military applications

Colours available: Black (standard), green, terracotta, light grey (Lead times vary for non-standard)

Ecogrid EL30
71 layers on a pallet=94.43 square metres. 2077 square metres on a full load

Technical data for the ECORASTER E30 Dimensions: 33 cm x 33 cm x 3 cm Wall thickness/wall height: 5.5 mm / 30 mm Weight per unit: 0,575 kg Weight per m2: 5,175 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 250 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

EL30 uses

Paths and drives
Carports
Paddocks
Garden paths
Pasture access and drives
Parks
Campsites
Garage drives
Wood and storage areas
Container depots
Flat silos
Market gardening
Roof greening
Colours available: Black

Ecogrid specialist products

Ecogrid A50
43 layers on a full pallet=57.19 square metres. 1258 square metres on a full load

Technical data for the ECORASTER A50: Dimensions: 33 cm x 33 cm x 5 cm Wall thickness/wall height: 7 mm / 50 mm Weight per unit: 1.08 kg Weight per m2: 10,917 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 800 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

A50 uses
Features a slotted cross central section that houses a spike for:
embankment reinforcement
Heavy duty traffic
Lateral loading

Colours available: Green

Ecogrid TR40
53 layers on a pallet=73.15 square metres. 1609 square metres on a full load

Technical data for the ECORASTER TR40: Dimensions: 33 cm x 33 cm x 4 cm Wall thickness/wall height: 4.5 mm / 40 mm Weight per unit: 0.63 kg Weight per m2: 5,22 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

TR40 uses

Designed with equine use in mind, this grid features small reservoirs within its structure, designed to retain moisture and dissipate it during the day when conditions are drier. The multifunctional riding arena grid ECORASTER-Ecogrid TR40 with storage. Newly incorporated water storage cells collect run-off and return it to the footing in periods of dry weather. This means up to 5 l of water per sq m can be stored. With its new geometry and new improved formula, this grid sets new standards in terms of ride, stability and safety.

Colours available: Terracotta

Ecogrid TP40
53 layers on a pallet=73.15 square metres. 1609 square metres on a full load

Technical data for the ECORASTER TP40: Dimensions: 33 cm x 33 cm x 4 cm Wall thickness/wall height: 4.5 mm / 40 mm Weight per unit: 0.63 kg Weight per m2: 5,22 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

Designed with equine use in mind, this grid features a rounded internal design for strength and rigidity.

Colours available: Terracotta

Ecogrid X30
71 layers on a pallet=94.43 square metres. 2077 square metres on a full load

Technical data for the ECORASTER X30 Dimensions: 33 cm x 33 cm x 3 cm Wall thickness/wall height: 5.5 mm / 30 mm Weight per unit: 0,575 kg Weight per m2: 5,175 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 250 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

X30 uses

Pathways
Chicken runs
Paddocks
Garden paths
Pasture access and drives
Parks
Campsites
Garage drives
Wood and storage areas
Container depots
Flat silos
Market gardening
Roof greening

Colours available: Black

Ecogrid combi systems: Featuring additional depths and pin or stake combinations

Ecogrid e85
55 layers on a pallet=73.15 square metres. 1609 square metres on a full load.

Features a 40mm grid and base pin for reduction of lateral movement. Overall system depth 140mm. 4 pins per square metre.

Technical data for the Ecogrid e85: Dimensions: 33 cm x 33 cm x 4 cm Wall thickness/wall height: 4.5 mm / 40 mm Weight per unit: 0.63 kg Weight per m2: 5,22 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range -50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

E85 uses

Car park reinforcement
Outdoor riding rings
Fire service access
Raised verge reinforcement
Connecting paths, drives
Building site routes, loading bays
Gardening and landscaping
Slope and dike reinforcements
Helipads
Airstrip reinforcements
Industrial and commercial applications
Military applications

Ecogrid S85

Colours available: Black (standard), green, terracotta, light grey (Lead times vary for non-standard) S85
55 layers on a pallet=73.15 square metres. 1609 square metres on a full load.

Features a 50mm grid and base pin for reduction of lateral movement. Overall system depth 140mm. 4 pins per square metre.

Technical data for the ECORASTER s85: Dimensions: 33 cm x 33 cm x 4 cm Wall thickness/wall height: 4.5 mm / 40 mm Weight per unit: 0.63 kg Weight per m2: 5,22 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range -50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

S85 uses

Car park reinforcement
Outdoor riding rings
Fire service access
Raised verge reinforcement
Connecting paths, drives
Building site routes, loading bays
Gardening and landscaping
Slope and dike reinforcements
Helipads
Airstrip reinforcements
Industrial and commercial applications
Military applications

Colours available: Black (standard), green, terracotta, light grey (Lead times vary for non-standard)

Ecogrid E85
55 layers on a pallet=73.15 square metres. 1609 square metres on a full load.

Features a 50mm grid and base pin for reduction of lateral movement. Overall system depth 140mm. 4 pins per square metre.

Technical data for the ECORASTER E85: Dimensions: 33 cm x 33 cm x 4 cm Wall thickness/wall height: 4.5 mm / 40 mm Weight per unit: 0.63 kg Weight per m2: 5,22 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

E85 uses

Car park reinforcement
Outdoor riding rings
Fire service access
Raised verge reinforcement
Connecting paths, drives
Building site routes, loading bays
Gardening and landscaping
Slope and dike reinforcements
Helipads
Airstrip reinforcements
Industrial and commercial applications
Military applications

Colours available: Black (standard), green, terracotta, light grey (Lead times vary for non-standard)

Ecogrid S100-premium
21 layers on a full pallet=28.59 square metres. 629square metres on a full load
Technical data for the ECORASTER S100: Dimensions: 33 cm x 33 cm x 5 cm Wall thickness/wall height: 5.5 mm / 50 mm Weight per unit: 0,74 kg Weight per m2: 6,84 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to 20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability:
temperature range 50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

S100 uses

The US100 is the premium grass parking grid for medium to light duty, it features a depth of 100mm consisting of two layers of the S50 grid system. The first layer is filled with a 50:50 mix of clean rounded 10mm stone and topsoil. The second layer is filled with a 70:30 mix of organic topsoil and sharp washed sand. The two grids are firmly pinned in to the sub-base layer with a supplied pin, allocated at 2 pins per square metre. Pins are forced through both layers of grids to stop lateral movement. Pins are made from MDPE, are black and are 145mm long, featuring 45mm secured to the sub-base.
Commercial and domestic grassed permeable parking systems Commercial and domestic grassed access routes

Colours available: Black (standard), green (Lead times vary for non-standard)

Ecogrid E100-Ultimate
21 layers on a full pallet=28.59 square metres. 629 square metres on a full load

Technical data for the ECORASTER E100 Ultimate: Dimensions: 33 cm x 33 cm x 5 cm Wall thickness/wall height: 5.5 mm / 50 mm
Weight per unit: 0,74 kg Weight per m2: 6,84 kg Material: 100 % recycling material PE (polyethylene) Compression strength: up to
20 tonnes axle load in accordance with DIN 1072 Carrying load per m2: up to 120 tonnes Dimensional stability: temperature range -50° to 90° C Dimensional change: 0.5 % (for a normal temperature +20° to 80° C) Absorption of humidity: 0,01 % Environmental compatibility: Environmentally neutral in accordance with DIN 38412 UV and frost resistant Solubility: resistant to acids, alkalis, oil and petrol (de-icing salt, ammonia, acid rain etc.) Laying performance: 100 m2 per person and hour

E100 Ultimate uses

The E100 is the Ultimate grass parking grid for heavy duty, it features a depth of 100mm consisting of two layers of the E50 grid system. The first layer is filled with a 50:50 mix of clean rounded 10mm stone and topsoil. The second layer is filled with a 70:30 mix of organic topsoil and sharp washed sand. The two grids are firmly pinned in to the sub-base layer with a supplied pin, allocated at 2 pins per square metre. Pins are forced through both layers of grids to stop lateral movement. Pins are made from MDPE, are black and are 145mm long, featuring 45mm secured to the sub-base.
Commercial grassed permeable parking systems
Commercial grassed access routes

Colours available: Black (standard), green (Lead times vary for non-standard)

Ecogrid accessories (Full brochures available on request)

Ecogrid softground 42
Comes as 9 tiles or a one square metre 12mm pad pre-set in a 30mm grid to provide a very sturdy and easy to fit soft play or soft mat for equestrian and play use. Overall depth 42mm. Fully UV stable and non-slip. With a generous critical fall height.

Colours available:
Black (standard)
Red
Blue
Green

Ecogrid softground 50
Comes as 9 tiles or a one square metre 12mm pad pre-set in a 30mm grid to provide a very sturdy and easy to fit soft play or soft mat for equestrian and play use. Overall depth 50mm. Fully UV stable and non-slip. With a generous critical fall height. Colours available: Black (standard)
Red
Blue
Green

Ecogrid parking bay markers
Fully UV stable and available in white, these bay markers clip firmly to the underneath of the grid. Four versions are available: 40mm flush bay marker
40mm raised bay marker
50mm flush bay marker 50mm raised bay marker Uses:
Marking of parking bays at 1 marker per tile or 3 per linear metre (Can be laid to the front elevation of bays to a ‘t’ design requiring less markers for budget projects.
Marking of disabled parking bays

Ecogrid angled grid
This unit clips to either 50mm or 40mm Ecogrid tiles and is 330mm long, 120mm wide when opened fully. It allows continuous runs of grid reinforcement from the horizontal to the vertical plane at any angle between 180 and 90 degrees. Uses: Embankment reinforcement Bunds
Swales
Ditch lining
Ditch reinforcement

Ecogrid curve 40
Clips to a 40mm grid, allowing the creation of a continuous curve without the need for cutting more curving pieces are added for sharper curves to an almost unlimited radius.
Available as standard in black, colours are available on request

Ecogrid curve 50
Clips to a 50mm grid, allowing the creation of a continuous curve without the need for cutting more curving pieces are added for sharper curves to an almost unlimited radius
Available as standard in black, colours are available on request

Ecogrid Trickrast edge standard
Size 330mm x 50mm x 60mm
Clips to the edge of a standard grid giving a non-slip, flush edge detail. Also allows easy dis-assembling of sections of Ecogrid when used for temporary projects such as fetes, events, concerts, displays etc.

Ecogrid Trickrast edge large
Size 385mm x 50mm x 60mm
Clips to the edge of a standard grid giving a non-slip, flush edge detail. Stops any gaps in systems when used in conjunction with the 330mm edge. Also allows easy dis-assembling of sections of Ecogrid when used for temporary projects such as fetes, events, concerts, displays etc.

Ecogrid budget ‘J’ pin
5mm galvanised steel pins 300mm deep to securely fix Ecogrid tiles to sub-bases or embankments

Ecogrid MDPE pin
A cost effective anchor for grid systems featuring a 30mm rounded head and a length of 145mm with a serrated shaft. Pins are driven in to the ground to reduce any lateral movement. Secure to the base of Ecogrid tiles.

Ecogrid edge
A 2 metre x 60mm, 10mm thick flexible edge used to create a riser for Ecogrid tiles to inhibit ‘travelling’ of gravel when over-laid to the Ecogrid system. The Ecogrid edge is also used with resin bound stone and resin bound rubber systems to creat a level guide ensuring an even distribution of the stone. Also can be cut in as a straight edge or curve to grids to create patterns and colour ranges.

Ecogrid anchor fixings
Drill a 6mm hole through the Ecogrid edge or Ecogrid tile and ‘push fit’ the anchor fixing to secure the two edges. This system can also be used for the sedum tray fixings and sedum tray edge system.

Ecogrid resin
A UV stable resin mix, supplied in 7kg kits that provide enough resin to mix with clean aggregate over a surface area of 3.5 metres at a depth of 20mm.

Ecogrid Bodenmat
A tough mat system that is fully load bearing, in sheets of 1200 x 800mm and a thickness of 22mm. An easy to fit non-slip durable mat for temporary flooring, festivals etc. Ideal when used in conjunction with the Ecogrid system when the surface needs to be sealed.

Ecogrid Bodenmat sloping edge
Used in conjunction with the Bodenmat system where safe access is required to the surface. Fully part ‘M’ compliant (disabled access)

Ecogrid Terraguide
A new addition to our range, we are pleased to offer this exclusively to the UK and ROI market. Terraguide is a free draining, easy to fit temporary flooring range consisting of squares 50mm x 50mm x 20mm, this sub-divided in to four smaller squares prelocked and fully flexible. The Terraguide sections easily lock together and are ideal for festivals, fetes, concerts etc where a free draining system is required for temporary flooring where there is no fading or damage to the grass which it covers.

Ecogrid Terraguide sloping edge
Used in conjunction with the Terraguide system where safe access is required to the surface. Fully part ‘M’ compliant (disabled access)

Ecogrid Recessed trays
We supply a full range of recessed and pedestrian manhole covers (http://www.recessedmanholecovers.co.uk/) including our own grasstop suitable for inspection covers in grassed areas and gravel top, used for ensuring inspection covers on gravel driveways are safe and non-slip.

Ecogrid membranes
A complete range of geotextile membranes (http://geotextilemembranes.co.uk/) suitable for all aspects of landscaping and construction

Ecogrid plastic lumber range
A range of fully recycled plastic lumber including profiles, posts and decking.

Ecogrid equestrian surfacing

We offer three types of equestrian surfacing under the Proground brand name

Protherm: a shredded carpet blend to be laid independently or mixed with an appropriate locally sourced sand mix for a firm and stable tread layer

Protex: a shredded fleece fibre blend to be laid independently or mixed with an appropriate locally sourced sand mix for a firm and stable tread layer

Ecogrid rubber shred: A 10-40mm fine shred with a minimal metal cointent